Automatic Dust Capping Machine Filling Milk Powder Biscuits Potato
Chips Capping
Main Parameters
| Production capacity: | 30-50 cans/min |
| Can sealing height: | 60-200mm |
| Applicable bottle diameter: | 50-120mm |
| Operating power: | AC220V 50/60Hz |
| Total Power: | 0.65KW |
| Weight: | 250KG |
| Dimension: | 2000*1000*1800mm |
The automatic dust capping machine is mainly suitable for the
sealing of round and square dustproof plastic caps of various PET
plastics, iron, aluminum, and paper cans. The product has advanced
design, reasonable structure and simple operation. , is the
necessary ideal packaging equipment for food, medical, tea and
chemical industries.
The main body of the automatic dust-proof capping machine is made
of stainless steel, which is durable and anti-corrosion. When using
a fully automatic dust capping machine to cap caps of different
diameters, it is only necessary to adjust the entertainment width
by adjusting the hand wheel. For caps of different heights, we can
also adjust the capping machine's adjustment hand wheel.
Structural performance description:
1. Use a pneumatic suction nozzle to suck the plastic cover in the
cover slot into the snap cover slot;
2. Bring the cans to the entrainment place through the movement of
the conveyor belt;
3. The entrainment drives the movement of the jar to bring out the
lid of the outlet and is pressed by the capping wheel;
4. The width of the entrainment can be adjusted by adjusting the
handwheel for lid glands of different diameters, which only takes 5
minutes;
5. It only takes 5 minutes to adjust the height of the capping
wheel by adjusting the handwheel for lid glands of different
heights;
Precautions
1. Installation location: horizontal, no vibration
2. The equipment shell must be connected to a safe and reliable
protective ground wire;
3. Keep away or shield larger interference;
4. No impact or heavy pressure;
5. Before and after operation, check whether the screws of various
parts of the machine are loose;
6. The power supply of the machine must be cut off when repairing
and cleaning the machine;
7. When the electrical part fails, it is forbidden for
non-electronic engineering technicians to repair it;
8. When the machine is running, it is forbidden to place all parts
of the human body close to the rotating positions of the machine;
9. When using an air compressor, the air source must be stable, not
less than 0.5Mpa, and a dryer must be used to ensure that the air
source entering the cylinder remains dry and provides service life;
